HMS
High speed mixing and batching system applicable to a wide variety of containers for the rapid introduction of powders to the bottom of the high shear area. Rapid dissolution and dispersion improve the mixing efficiency. Powders can be introduced at high, medium or low level, suitable for online automatic batching.
| Model | Power(kW) | Working Capacity (m³) | Flow Rate Range (m³) |
| HMS-0.5T | 7.5-18.5 | 0.5 | 10-20 |
| HMS-1T | 22-30 | 1 | 20-30 |
| HMS-2T | 37-45 | 2 | 30-40 |
Remarks
- Flow rate ranges are based on a water medium, and the outlet pressure for all models does not exceed 0.15 MPa.
- A batch high shear emulsifier in the tank alongside the inline emulsifier is recommended if circulation is required.
- Customers should provide detailed information regarding special working conditions, such as high temperature and pressure, flammable, explosive or corrosive conditions.
- A transfer pump with moderate flow rate should be connected in front of the inline high shear emulsifier when the materials cannot flow well. The pump pressure should not exceed 0.3 MPa.
- FLUKO reserves the right to change specifications without announcement.
- For more models, please contact FLUKO.
